Hunter-fan 30721 User Manual download pdf (Page 11)

11 43007-01

Air Purier Maintenance

Cleaning Your Air Purier

Proper maintenance of your Hunter Air Purier will help ensure years of trouble free

service.

Follow these steps to properly maintain your air purier:

1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,

damp cloth.

2. If needed, the front grill can be removed from the unit and cleaned with soapy water.

Simply remove the pre-lter before exposing the grill to water.

3. Follow the instructions in Changing the Pre-Filter and Cleaning the Filter (pgs. 11 and

12) to determine when and how to replace or clean the lters.

NOTES:

• The air purier must be unplugged during the cleaning process.

• Be sure the unit is completely dry before plugging in and using.

• Never immerse unit in water.

Changing the Pre-Filter

When the Pre-Filter exceeds 1400 hours (refer to Filter Life Counters for additional infor-

mation, pg. 9), the Pre-Filter Life Counter will display 0% life remaining and the Pre-Filter

indicator will ash as a reminder that you should replace the pre-lter. To maintain proper

odor-removing capability and overall ltration performance, the pre-lter should be

changed every 1400 hours (approximately 3 months of use). If necessary, the pre-lter

can be changed more often. Proper maintenance of the pre-lter will help extend the life

of the HEPAtech® lter. Refer to Obtaining Replacement Filters (pg. 14) if you need help

nding replacement lters.

To change the Pre-Filter and reset the Pre-Filter Life Counter:

1. First, turn o and unplug the air purier.

2. Next, remove the front grill. Place your ngers under the handle on the grill

and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).

3. The pre-lter is attached to the inside of the grill with hook tape. Pull gently on

the pre-lter to remove it. Refer to Fig. 11 (pg. 11).

4. If needed, use a soft damp cloth to wipe o the grill.

5. Install the new pre-lter by placing it in the grill and pressing gently on the pre-

lter so that it adheres to the hook tape. You may notice a few black particles

coming o the pre-lter. Those particles are part of the odor-removing activated

carbon and will be collected on the lter during regular use.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

No comments

Hunter-fan 30721 User Manual Page 11