Hunter-fan HEPATECH 30057A User Manual download pdf (Page 3)

Tabs for

opening the

front grill

HEPAtech

Filter

Pre-Filter

Front

Grill

Figure 2 - Model 30067A, 30124A

Figure 3

Hook Tape

Grill Vents

Hook Tape

Front

Grill

Pre-Filter

HEPAtech

Filter

Buttons for

opening the

front grill

Setting Up Your Air Purier

1. Remove your air purier from the box and take it out of the clear plastic

protective bag.

2. Place your HEPAtech

Air Purier on a rm, at oor.

3. Before turning the Air Purier ‘on,’ open the front grill.

• For Model 30057A, 30061: To release the front grill, press the buttons

on the side until the front grill slides easily over the buttons. (Refer to Figure

1.)

• For Model 30067A, 30124A: To release the front grill, place your

ngers behind the tabs and pull forward. (Refer to Figure 2.)

4. Next, check the HEPAtech

lter by pressing rmly on all four corners of the

lter to ensure that it is fully inserted into the lter opening.

5. The carbon pre-lter is mounted inside of the front grill with “hook” tape.

Conrm that it covers the grill vents. (Refer to Figure 3.)

6. Place the lter installation reminder sticker on the inside edge of the front

grill. Circle the month and write the year of installation for the pre-lter and

HEPAtech

lter.

7. Replace the lter and front grill. Be sure that the bottom grill tabs are in

position rst, and then push the top of the grill forward until it is closed. The

unit is now ready for normal operation. NOTE: This unit will not operate

unless the door is placed in the correct position.

8. Plug the unit into a 120V electrical outlet.

AIR PURIFIER PARTS

Figure 1 - Model 30057A, 30061

1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments

Hunter-fan HEPATECH 30057A User Manual Page 3

Comments to this Manuals

Related products and manuals for Air purifiers Hunter-fan HEPATECH 30057A