Hunter-fan 42639-01 User Manual download pdf (Page 8)

5 • Installing the Canopy and Canopy Trim Ring

Step 5-2

Canopy Trim

Ring

Canopy

Ceiling Plate

Canopy

Screw

Steps 5-4 – 5-5

Should you need to remove the canopy trim ring, follow

these steps:

1. Locate the tab indicators, small bumps on top of tabs.

2. Press ﬁrmly on opposite sides of the ring towards the

canopy. e tabs will ﬂex out releasing the trim ring from

the canopy.

5-1. Holding the canopy, raise the fan oﬀ the hook.

5-2. Align the slots in the canopy with the tabs on the ceiling plate.

5-3. Raise the canopy over the ceiling plate. Rotate the canopy

clockwise until the tabs on the ceiling plate totally engage with

the slots in the canopy.

5-4. Partially install the three canopy screws into the canopy one at a

time. Once all three screws are in, tighten them.

5-5. Using both hands, push the canopy trim ring up to the top of the

canopy. e canopy trim ring will snap and lock into place.

Step 5-3

Hunter Fan Company 42639-01 • 4/5/07

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Hunter-fan 42639-01 User Manual Page 8